David Bauer f518d014c7 ath79: add support for Ubiquiti UniFi AP Pro ... This adds support for the Ubiquiti UniFi AP Pro to the ath79 target. The device was previously supported on the now removed ar71xx target. SoC Atheros AR9344 WiFi Atheros AR9344 & Atheros AR9280 ETH Atheros AR8327 RAM 128M DDR2 FLASH 16M SPI-NOR Installation ------------ Follow the Ubiquiti TFTP recovery procedure for this device. 1. Hold down the reset button while connecting power for 10 seconds. 2. Transfer the factory image via TFTP to the AP (192.168.1.20) 3. Wait 2 minutes for the AP to write the firmware to flash. The device will automatically reboot to OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net>		2020-09-19 18:44:27 +08:00
..
imagebuilder	build: add whatdepends target to imagebuilder	2020-09-01 17:32:03 +08:00
linux	ath79: add support for Ubiquiti UniFi AP Pro	2020-09-19 18:44:27 +08:00
sdk	SDK: multi-cores compress SDK	2020-07-27 23:24:57 +08:00
toolchain	toolchain/wrapper.sh: fix remaining shellcheck warnings	2020-07-12 12:12:56 +08:00
Config.in	target: make TESTING_KERNEL selectable	2020-04-14 23:56:07 +08:00
Makefile