fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
74c3699c02
immortalwrt/target/linux/rockchip/image/armv8.mk

192 lines
4.8 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 21:52:34 +08:00
# SPDX-License-Identifier: GPL-2.0-only
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 19:57:25 +08:00
#
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 21:52:34 +08:00
# Copyright (C) 2020 Tobias Maedel
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 16:08:57 +08:00
rockchip: use LZMA FIT for kernel image Use LZMA compressed kernel to save some space in boot partition. Fixes: #11197 Tested-by: Tianling Shen <cnsztl@immortalwrt.org> [NanoPi R2S] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2022-11-13 21:29:26 +08:00
# FIT will be loaded at 0x02080000. Leave 16M for that, align it to 2M and load the kernel after it.
KERNEL_LOADADDR := 0x03200000
rockchip: add Mrkaio M68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 4GB LPDDR4 RAM 2x 1000 Base-T 2 LEDs (SATA / POWER) 32GB eMMC on-board Micro-SD Slot SATA slot 2x USB 3.0 Port HDMI 2.0, MIPI DSI/CSI USB Type C PD [updated commit title/description, fixed dts syntax, set irq for it] Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-28 10:10:47 +08:00
define Device/ezpro_mrkaio-m68s
DEVICE_VENDOR := EZPRO
DEVICE_MODEL := Mrkaio M68S
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: add Mrkaio M68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 4GB LPDDR4 RAM 2x 1000 Base-T 2 LEDs (SATA / POWER) 32GB eMMC on-board Micro-SD Slot SATA slot 2x USB 3.0 Port HDMI 2.0, MIPI DSI/CSI USB Type C PD [updated commit title/description, fixed dts syntax, set irq for it] Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-28 10:10:47 +08:00
DEVICE_PACKAGES := kmod-ata-ahci kmod-ata-ahci-platform
endef
TARGET_DEVICES += ezpro_mrkaio-m68s
rockchip: fix supported device for firefly roc-rk3328-cc Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 20:05:08 +08:00
define Device/firefly_roc-rk3328-cc
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
DEVICE_VENDOR := Firefly
DEVICE_MODEL := ROC-RK3328-CC
SOC := rk3328
rockchip: fix supported device for firefly roc-rk3328-cc Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 20:05:08 +08:00
DEVICE_DTS := rockchip/rk3328-roc-cc
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
UBOOT_DEVICE_NAME := roc-cc-rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
endef
rockchip: fix supported device for firefly roc-rk3328-cc Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 20:05:08 +08:00
TARGET_DEVICES += firefly_roc-rk3328-cc
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-04 01:51:27 +08:00
rockchip: add NanoPi R2C support This board is a fork of NanoPi R2S, with the native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d9cb05957d6454f85285715162781e27f22b329e)
2021-08-13 03:02:59 +08:00
define Device/friendlyarm_nanopi-r2c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add NanoPi R2C support This board is a fork of NanoPi R2S, with the native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d9cb05957d6454f85285715162781e27f22b329e)
2021-08-13 03:02:59 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c
rockchip: add NanoPi R2C Plus The FriendlyARM NanoPi R2C Plus is a minor variant of R2C with a on-board 8G eMMC flash. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:29:01 +08:00
define Device/friendlyarm_nanopi-r2c-plus
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C Plus
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add NanoPi R2C Plus The FriendlyARM NanoPi R2C Plus is a minor variant of R2C with a on-board 8G eMMC flash. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:29:01 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c-plus
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 16:08:57 +08:00
define Device/friendlyarm_nanopi-r2s
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := FriendlyARM
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 16:08:57 +08:00
DEVICE_MODEL := NanoPi R2S
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 16:08:57 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r2s
rockchip: add NanoPi R4S support Hardware -------- RockChip RK3399 ARM64 (6 cores) 1GB DDR3 or 4GB LPDDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Co-authored-by: Jensen Huang <jensenhuang@friendlyarm.com> Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com> Co-authored-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-12-25 20:03:14 +08:00
define Device/friendlyarm_nanopi-r4s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4S
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
DEVICE_PACKAGES := kmod-r8168
rockchip: add NanoPi R4S support Hardware -------- RockChip RK3399 ARM64 (6 cores) 1GB DDR3 or 4GB LPDDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Co-authored-by: Jensen Huang <jensenhuang@friendlyarm.com> Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com> Co-authored-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-12-25 20:03:14 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s
rockchip: add NanoPi R4SE The FriendlyARM NanoPi R4SE is a minor variant of R4S with a on-board eMMC. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-30 14:55:59 +08:00
define Device/friendlyarm_nanopi-r4se
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4SE
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add NanoPi R4SE The FriendlyARM NanoPi R4SE is a minor variant of R4S with a on-board eMMC. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-30 14:55:59 +08:00
DEVICE_PACKAGES := kmod-r8168
endef
TARGET_DEVICES += friendlyarm_nanopi-r4se
rockchip: add NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. This patch removed the MAC address hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-09-16 20:18:34 +08:00
define Device/friendlyarm_nanopi-r4s-enterprise
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := FriendlyARM
rockchip: add NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. This patch removed the MAC address hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-09-16 20:18:34 +08:00
DEVICE_MODEL := NanoPi R4S Enterprise Edition
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-r8168
rockchip: add NanoPi R4S Enterprise Edition The only diffrence against the standrard edition is that the enterprise one has a built-in EEPROM chip which stores a globally unique MAC address. This patch removed the MAC address hack. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-09-16 20:18:34 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s-enterprise
rockchip: add NanoPi R5C support Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-15 16:31:04 +08:00
define Device/friendlyarm_nanopi-r5c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5C
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
Merge Official Source Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-26 10:23:58 +08:00
DEVICE_PACKAGES := kmod-r8125 kmod-rtw88 rtl8822ce-firmware wpad-basic-openssl
rockchip: add NanoPi R5C support Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-15 16:31:04 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r5c
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-17 11:16:36 +08:00
define Device/friendlyarm_nanopi-r5s
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := FriendlyARM
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-17 11:16:36 +08:00
DEVICE_MODEL := NanoPi R5S
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-r8125
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-17 11:16:36 +08:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r5s
rockchip: add NanoPi R6S support Hardware -------- RockChip RK3588S ARM64 (8 cores) 8GB LPDDR4X RAM 1x 1000 Base-T (native, rtl8211f) 2x 2500 Base-T (PCIe, rtl8125b) 4 LEDs (SYS / WAN / LAN1 / LAN2) 2 Button (GPIO Reset, MaskROM) 32GB eMMC on-board Micro-SD Slot USB 3.0 Port USB 2.0 Port 2x HDMI 2.1 IR receiver USB Type C PD 5/9/12/20V Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-29 15:34:35 +08:00
define Device/friendlyarm_nanopi-r6s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R6S
SOC := rk3588s
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += friendlyarm_nanopi-r6s
rockchip: add GuangMiao G4C support This board was designed as a clone of NanoPi R4S. However, it didn't follow the spec and changed the power-supply system massively, and because of it there's no way to soft reset this board currently. For reboot, you must cut off the power and reengage it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-29 16:18:08 +08:00
define Device/huake_guangmiao-g4c
DEVICE_VENDOR := Huake-Cloud
DEVICE_MODEL := GuangMiao G4C
SOC := rk3399
BOOT_FLOW := pine64-bin
DEVICE_PACKAGES := kmod-r8168
endef
TARGET_DEVICES += huake_guangmiao-g4c
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
define Device/lunzn_fastrhino-r66s
DEVICE_VENDOR := Lunzn
DEVICE_MODEL := FastRhino R66S
SOC := rk3568
UBOOT_DEVICE_NAME := fastrhino-r66s-rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += lunzn_fastrhino-r66s
define Device/lunzn_fastrhino-r68s
DEVICE_VENDOR := Lunzn
DEVICE_MODEL := FastRhino R68S
SOC := rk3568
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-img
rockchip: add Fastrhino R68S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4 RAM 2x 1000 Base-T 2x 2500 Base-T 2 LEDs (Power / Status) 2 Buttons (Reset / Recovery) 16 GB eMMC on-board 2x USB 3.0 Port Installation ------------ See https://github.com/1715173329/blog/issues/4 Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-11-01 17:08:20 +08:00
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += lunzn_fastrhino-r68s
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 19:57:25 +08:00
define Device/pine64_rockpro64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := RockPro64
SOC := rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 19:57:25 +08:00
endef
TARGET_DEVICES += pine64_rockpro64
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-26 02:00:40 +08:00
rockchip: add Rock 5B support Hardware -------- RockChip RK3588 ARM64 (8 cores) 4/8/16GB LPDDR4X RAM 2500 Base-T (PCIe, rtl8125b) RGB LED 8/16/32/64/128GB eMMC on-board Micro-SD Slot USB 2.0 Port Headphone USB PD 2.0 12/15/20V Install -------- Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 19:13:44 +08:00
define Device/radxa_rock-5b
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5B
SOC := rk3588
UBOOT_DEVICE_NAME := rock5b-rk3588
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-r8125
endef
TARGET_DEVICES += radxa_rock-5b
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 23:36:48 +08:00
define Device/radxa_rock-pi-4a
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-26 02:00:40 +08:00
DEVICE_VENDOR := Radxa
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 23:36:48 +08:00
DEVICE_MODEL := ROCK Pi 4A
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-26 02:00:40 +08:00
SOC := rk3399
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 23:36:48 +08:00
SUPPORTED_DEVICES := radxa,rockpi4a radxa,rockpi4
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-26 02:00:40 +08:00
UBOOT_DEVICE_NAME := rock-pi-4-rk3399
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: re-enable wifi for rockpi 4a Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-07-12 21:10:36 +08:00
DEVICE_PACKAGES := kmod-brcmfmac wpad-basic-openssl \
brcmfmac-firmware-43456-sdio brcmfmac-nvram-43456-sdio
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-26 02:00:40 +08:00
endef
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 23:36:48 +08:00
TARGET_DEVICES += radxa_rock-pi-4a
rockchip: add support for OrangePi R1 Plus Hardware Specification: CPU: RockChip RK3328 (4 cores) RAM: 1GB DDR4 Ethernet: 2x 1000 Base-T Flash: SPI-NOR 16 MB (mx25l12835f) LED: SYS, LAN, WAN MicroSD Slot x 1 Button: Reset USB:1x 2.0 Serial1: 13 Pin pin-header Serial2: 3 Pin debug port Type-C: for power input Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2021-03-28 21:00:18 +08:00
rockchip: add Rock Pi E support Hardware -------- RockChip RK3328 ARM64 (4 cores) up to 4GB DDR3 RAM 100 Base-T 1000 Base-T LED (status) ADC button Micro-SD slot eMMC slot USB 3.0 Port Type-C power Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-17 15:18:36 +08:00
define Device/radxa_rock-pi-e
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi E
SOC := rk3328
SUPPORTED_DEVICES := radxa,rockpi-e
BOOT_FLOW := pine64-bin
endef
TARGET_DEVICES += radxa_rock-pi-e
rockchip: add support for OrangePi R1 Plus Hardware Specification: CPU: RockChip RK3328 (4 cores) RAM: 1GB DDR4 Ethernet: 2x 1000 Base-T Flash: SPI-NOR 16 MB (mx25l12835f) LED: SYS, LAN, WAN MicroSD Slot x 1 Button: Reset USB:1x 2.0 Serial1: 13 Pin pin-header Serial2: 3 Pin debug port Type-C: for power input Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2021-03-28 21:00:18 +08:00
define Device/xunlong_orangepi-r1-plus
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1 Plus
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: add support for OrangePi R1 Plus Hardware Specification: CPU: RockChip RK3328 (4 cores) RAM: 1GB DDR4 Ethernet: 2x 1000 Base-T Flash: SPI-NOR 16 MB (mx25l12835f) LED: SYS, LAN, WAN MicroSD Slot x 1 Button: Reset USB:1x 2.0 Serial1: 13 Pin pin-header Serial2: 3 Pin debug port Type-C: for power input Power Supply: DC 5V/2A Installation: Write the image to SD Card with dd. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2021-03-28 21:00:18 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus
rockchip: add OrangePi R1 Plus LTS support This board is a fork of OrangePi R1 Plus, with native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-01-04 17:01:13 +08:00
define Device/xunlong_orangepi-r1-plus-lts
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_VENDOR := Xunlong
rockchip: add OrangePi R1 Plus LTS support This board is a fork of OrangePi R1 Plus, with native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-01-04 17:01:13 +08:00
DEVICE_MODEL := Orange Pi R1 Plus LTS
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
SOC := rk3328
rockchip: simplify redudant commands Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-10 20:58:14 +08:00
BOOT_FLOW := pine64-bin
rockchip: fix image build Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-02-20 12:20:10 +08:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
rockchip: add OrangePi R1 Plus LTS support This board is a fork of OrangePi R1 Plus, with native NIC changed. Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2022-01-04 17:01:13 +08:00
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus-lts
Reference in New Issue Copy Permalink